IP67 Inline Mount Fuse Holder Yellow Waterproof In-line Fuse Block
UL 94V-0 Rubber for 6x30 6x32 Tube FusesProduct Description
For 6x30mm FUSES
- Withstanding Voltage:>AC2000V/1min
- lnsulation Resistance:≥100mΩ DV500V
- Electrical:Rated at 30A 250V AC
- Insulating Body: Thermoplastic Rubber/PVC
- Terminals:tin plated brass
- Operation temperature:-50°C~185°C
| Item | Waterproof 6x32 6x30 fuse holder |
| Mouting Style | In-line |
| Max Rating | 30A 250V |
| Body Color | yellow |
| House material | rubber |
| Terminal material | brass |
| Body length | 70mm |
| Body diameter | 17.6mm |
| Protection Grade | IP67 |
Features of the Waterproof 6x30 In-line Fuse Holder Yellow Body
Wide range and customized services
| Fuses Amperes | 0.2A~30A (UL lISTED) |
| Wire Gauge | 18AWG 16AWG 14AWG 12AWG (UL1015 PVC) |
| Custom Cable | length & color (upon request) |
This is an in line fuse. Just cut the wire where you want the fuse
to go and then slide the wire into the fuse jacket holes on each
end and crimp. You're done. Takes less than a minute to install.
| Structure | body, terminal contacts x2, , wire, fuse |
| Electrical rating | 250V 30A max |
| Body Material | PVC/Rubber |
| Contact Material | Tinned Brass |
| Wire Material | PVC and tinned copper |
Drawing
Please allow 1-3mm tolerance due to manual measurement.
What gauge wire will this fuse holder work best with?
Depends on rated amperage. For example: 10 amps for 20'= #12 wire,
20 amps for 20' = #8.
Applications
Electronic boards, Car, Boat, Truck, SUV, Motorcycle, etc.
Standard Package:
depends on the cable spec
Shipping Term:
EXW, DDU, DDP, C&F, FOB
Shipping Methods:
International Express, By Air, By Sea
Selection of the Fuse and Holder Solution
The first step is to answer the following questions:
- Will the fuse need to accessible for replacement?
- How often will the fuse need to be replaced?
- Should the end customer of the appliance have access to change the
fuse?
- Should the fuse only be accessible from outside the appliance?
- How much is available to spend on safety and reliability?
5.1.2. Requirements and characteristics
The most important standards for fuse-holders, which specify
requirements, characteristics and testing methods are:
- IEC-publication 257 (1968) and Amendment no. 2 to this publication
dated January 1989.
- UL-standard no. 512.
Q: Are you trading company or manufacturer ?
A: We are a fuse product factory.
Q: How long is your delivery time?
A: 3 days if the goods are in stock, 5-10 days if the goods not in
stock, according to the quantity.
Q: Do you provide samples ? is it free?
A: Yes, samples are for free charge but we do not pay for the cost
of freight.
Q: What is your terms of payment ?
A: 100% in advance, T/T.
IP67 In-line Fuse Holder UL 94V-0 Rubber for 3AG Tube Fuses
| Item | Waterproof 6x32 6x30 fuse holder |
| Mouting Style | In-line |
| Max Rating | 30A 250V |
| Body Color | yellow |
| House material | rubber |
| Terminal material | brass |
| Body length | 70mm |
| Body diameter | 17.6mm |
